TPM chip protecting SSH keys - properly
Not long after getting my TPM chip to protect SSH keys in a recent blog post, it started to become obvious that OpenCryptoKi was not the best solution. It’s large, complicated, and, frankly, insecure. I dug in to see if I could fix it, but there was too much I wanted to fix, and too many features I didn’t need.
So I wrote my own. It’s smaller, simpler, and more secure. This post is about this new solution.
Why not Opencryptoki?
- It generates at least some keys in software. As I’ve explained earlier, I want to generate the keys in hardware.
It generates migratable keys. This is hardcoded, and some people obviously want migratable keys (for backup purposes). So a fix would have to involve supporting both.
Opencryptoki has no way to send such parameters from the command line key generator to the PKCS11 library. So not only would I have to implement the setting, but the whole settings subsystem.
The code is big, because it supports a lot of features. Features I don’t need or want. They get in the way of me as a user, and of me fixing the other issues.
The code is of pretty poor quality. I encountered configuration problems causing segfaults, and that many (if not most) errors (like permission errors) give the error message “Incorrect PIN”, because system calls are not checked for success. I can’t trust code where a function that is meant to lock a file using
flock()file descriptor 2^32-1, because
open()was not checked for success. (of course,
flock()was not checked for success either, so it just continued happily without having locked anything!)
So what should the replacement be able to do?
- Generate 2048bit RSA non-migratable keys
- Use these keys to sign data (this is how SSH keys work)
- Interface with the PKCS11 API
How to use it
$ mkdir ~/.simple-tpm-pk11 $ stpm-keygen -o ~/.simple-tpm-pk11/my.key [...] $ echo key my.key > ~/.simple-tpm-pk11/config $ echo -e "\nHost *\n PKCS11Provider /usr/local/lib/libsimple-tpm-pk11.so" >> ~/.ssh/config $ ssh-keygen -D /usr/local/lib/libsimple-tpm-pk11.so | ssh shell.example.com tee -a .ssh/authorized_keys $ ssh shell.example.com # Unless you have an ssh-agent with other keys, this will use the hardware-protected key.
That’s simple enough, isn’t it? No harder than generating a software
How to install it
Also easy. The code itself is a simple
./configure && make && make
./bootstrap.sh if you take the code from GIT
Initialising the TPM chip is the step that may give you trouble, but should be simple to solve with at most a reboot or two in case you need to reset the TPM, to reclaim ownership.
You only need to do one thing: Take ownership. Ideally you only have
tpm_takeownership -z and give it an “owner password”, but you
may get errors like:
- It asks for the old owner password. Solution: reset the TPM chip
- Actually, any other error: reset the TPM chip.
- Resetting TPM chip with
tpm_clearfails: Power down (fully), then reset the chip from BIOS.
I’ve put some more TPM troubleshooting info in TPM-TROUBLESHOOTING, but it’s pretty much just the above.
git clone <a href="">https://github.com/ThomasHabets/simple-tpm-pk11.git</a>
I’ll see if I can get a Debian Developer to help me get it into Debian.
- Chaps, a bigger, more ambitious project for PKCS11 and TPMs coming out of ChromeOS.